Optical Smoke Detector (Model 55000-600IMC)
OPTICAL SMOKE DETECTOR (MODEL 55000-600IMC)
The Optical Smoke Detector has a moulded extinguishing white polycarbonate case with wind resistant smoke inlets and is distinguished by the indicator LED which is clear in standby and red in alarm. Within the case is printed circuit board which, on one side has the light proof labyrinth chamber with integral gauze surrounding the optical measuring system and on the other, the address capture, signal processing and communications electronics.
An infrared light emitting diode within its collimator is arranged at an obtuse angle to the photo-diode. The photo-diode has an integral daylight blocking filter.
- Supply voltage from 17 to 28 Volts DC
- Quiescent current at 340µA average, 600µA peak surge current at 1mA
- Two wire supply of polarity insensitive
- Operating temperature range from -20°C to +60°C
- Clear LED emitting red light as alarm indicator
- Sensitivity to nominal threshold of 2.4% light grey smoke obscuration per meter
- 0% to 95% relative humidity with no condensation or icing
- IP rating of 43
- 100mm (Diameter) x 42mm (Height)
- 105g
| Supply Voltage | 17 to 28 Volt dc |
| Quiescent Current | 340µA average, 600µA peak surge current at 1mA |
| Operating Temperature | -20°C to +60°C |
| Alarm Indicator | Clear light emitting diode (LED) emitting red light |
| Sensitivity | Nominal threshold of 2.4% light grey smoke obscuration per metre |
| Humidity (No Condensation or Icing) | 0% to 95% relative humidity |
| Dimensions (Diameter x Height) | 100 x 42 mm (Detector) 100 x 50 mm (Detector in Base) |
| Weight | 105g (Detector) 157g (Detector in Base) |