High Heat Temperature Detector (Model D-143)
HIGH HEAT TEMPERATURE DETECTOR
(MODEL D-143)
The Demco Detector is a heat sensitive electrical switch. It is a fixed temperature device with a factory pre-set temperature 232°C.
The D-143 Detector comprises of normally open electrical contacts mounted within a stainless steel probe. A rise in temperature will cause the contacts to close at the set point temperature. With the drop in temperature the procedure reverses and the contacts re-open below set point temperature.
The detector body is a precision machine from AISI304 Stainless Steel with high corrosion resistance. The operation parts are factor calibrated and sealed against severe environmental condition, further adjustment or calibration is not required.
- Resetting Type Heat Detector
- Rate Compensation & Fast Response
- Thermostat Switches Contacts
- Corrosion & Shock Resistant
- Single Mounting Thread
- Thermocouple Wires
| Model | D-143 |
| Contacts | NO, NC on temperature rise |
| Applied Voltage AC | 32V max |
| Applied Voltage DC | 32V max |
| Operating Current | 0.25A max |
| Operating or Set Temperature Range | 232°C |
| Ambient Temperature Range (cont. exposure) | -10°C to +180°C |
| Relative Humidity | 100% |
| Weight | 190g |
| Sensitivity and Accuracy | ±10% or 10 degrees |
| Mounting Screw Threads | 10Kgm torque max |