DEMCO Photoelectric Smoke Detector D-233 with its new sensor design incorporates an internal pulsing LED and a photo-diode at an obtuse angle, is ideal for applications where slow-burning or smouldering fires are likely.
The D-233 has an advanced solid- state, low-voltage, surface-mount circuitry and are designed for 2-Wire installation using the D32003 universal base. The detector head is installed into the base with a simple twist-lock action.
The 360-degree detector design permits smoke entry from any direction, and a unique sensing chamber that permits operation in open areas with air velocities from 0 to 300 fpm. A fine wire mesh extending between offset ports in the exterior and interior walls screens insects from the chamber and obstructs light from passing directly to the interior part.
Model | Heat Sensor Setting | Voltage DC (Max./ Min.) | Stand by Current (Max.) | Alarm Current (12/24V) | Surge Current (Max.) | Start Up Time (Max.) | Permissible Current (Max.) | Cycle Time | Base Model No. | Safety |
D-233-2 | - | 10.8~33V | 80μA | 22/55mA | 160μA | 30 Sec. | 80mA | 1-5 Sec. | D32003 | UL/CE |
D-233-2L | - | 10.8~33V | 80μA | 22/55mA | 160μA | 30 Sec. | 80mA | 1-5 Sec. | D34003 | UL/CE |
D-233-2H | 135 ± 5 ºF | 10.8~33V | 80μA | 22/55mA | 160μA | 30 Sec. | 80mA | 1-5 Sec. | D32003 | UL/CE |
D-233-2HL | 135 ± 5 ºF | 10.8~33V | 80μA | 22/55mA | 160μA | 30 Sec. | 80mA | 1-5 Sec. | D34003 | UL/CE |
Smoke Senitivity |
0.98–2.40%FT Obscuration (UL) ; 0.08–0.14 dB/m (EN)
|
Ceiling Spacing |
50-foot rating for heat detector
|
Temperature Range | -10 ºC to 50 ºC |
Humidity |
0 to 95% RH, no condensation or icing
|
Dimensions (H x D) |
46 X 100mm with base
|
Weight |
130g/set with base
|
Specifications are subject to change without prior notice.